Chess Subsea Engineering Limited Oil & Gas Training in Nigeria April 2022

Chess Subsea Engineering Europe is a UK based ISO 9001, 45001 & 14001 certified & CPD UK accredited dynamic international company founded in 2013 to provide engineering service, training, manpower supply, research & development in renewable energy / offshore / subsea oil and gas industries with innovative design tailored to customer needs is offering the following discounted courses for Nigerian graduates, field technicians & engineers switching careers or expanding their skills in the oil and gas sector.

Chess Subsea Engineering is fully registered, verified and certified as a lead trainer across facility management / renewable energy / offshore / subsea oil and gas industries and a proud member of Oil & Gas Trainers Association of Nigeria (OGTAN).

OGTAN vision is to establish a Nigerian Oil and Gas Training Business Group responsible for articulating and advancing Human Capacity Development in the Oil & Gas Industry and protecting the interest of member-companies and stakeholders on issues of common interests.

Our training and manpower development branch were created in response to the demand for capacity building and higher technical competency in the oil and gas industry.

Following the Nigerian Local Content requirements for oil and gas training to be done indigenously, Chess Subsea Engineering, based in United Kingdom, is providing the following training in Nigeria at a discounted rate of 50% percent off all through the Month of April 2022 only.
CADDAS Renewable Energy Systems Offshore & Subsea Engineering four (4) Months Design Simulation & Integration on the Job Training (OJT) Programme
Objective of the programme is to enable participant to support renewable energy projects, deep and shallow water assets with minimum supervision for all engineering designs, deepwater diving operations & subsea related activities including:
o working out the technical and economic aspects of new renewable energy sites, including wind farms, solar installations and hydro or marine power
o carrying out site and ground condition inspections for new and existing sites
o using computer modelling software to produce detailed designs and energy production estimates
o ensuring that the installation and running of renewable energy sites meets environmental laws
o Conducting proactive surveillance of subsea equipment from data interrogated from surveillance tools and presenting insights on performance in addition to identifying opportunities to enhance existing operations.
o Conducting proactive surveillance of subsea equipment from data interrogated from surveillance tools and presenting insights on performance in addition to identifying opportunities to enhance existing operations.
o Producing engineering deliverables, which may include engineering support to DO, design calculations, specifications, procedures, analyses, progress reports, bid evaluations, study reports and 3rd-party submissions.
o Consolidates knowledge in areas of discipline engineering, including design codes, legislative requirements and current good engineering practice.
o Reviewing Design Proposals from contractor Design proposals include Basis of Design, Flow Diagrams, Specifications, Procedures, Calculation Notes, & MTOs .
o Ensuring that Design proposals from contractor meet the requirements and expectations of the various Exhibits in the FEED Contract.
o Reviewing documents issued by contractor for the Scope of Work relevant to the Subsea Jumpers & Connection Systems.
o Provide the main interface between the ROV contractor and the client. In addition; able to develop detailed procedures, equipment lists, deck plans and any other relevant requirements.
o Participating in Design Reviews, and Technical Workshops and any other Meetings as assigned within the Scope of Work relevant to the Subsea Jumpers & Connection Systems.
o Ensuring Interface issues from other Packages relevant to the Jumpers & Connection Systems are resolved in a timely manner.
o Maintaining the integrity and functionality of all components of the subsea control system from the Well subsea tree to the interface with topsides controls systems including associated umbilical connectors, electrical power system, hydraulic system and associated equipment of the overall subsea control system.
o Generating overall subsea infrastructure field layout summarizing the output from the many other work activities, taking into account: planned well top hole locations, drilling rig location, reach and operational constraints, well deviation costs, seabed/shallow hazards and topography, flowline and umbilical architecture and operation, future field expansion capability, etc.
o Ensuring that the hardware are installed correctly via creation of thorough installation and pre-commissioning procedures and that interfaces with all project team personnel are properly effectively managed.
o Providing technical support during offshore installation, commissioning and start up.
o Troubleshooting subsea flow assurance, control systems issues as and when they arise and also assists in the production of technical documentation.
o Addressing subsea hardware related queries and technical clarification questions from vendors, developing technical evaluation criteria and delivering the technical evaluation of the subsea hardware scope
o Developing subsea inspection plans and supporting execution of survey activities for subsea equipment
o Analyzing inspection results and conducting fitness for service assessment to ensure integrity of the subsea equipment
o Participating in, or leading various safety studies/activities such as: PHAs, HAZOPS, JSAs and incident investigations for marine systems. In addition; prepare and present, Task Risk Assessments.
o Supporting maintenance of subsea equipment spares inventory and subsea tooling.
o Interfacing with diverse groups including vendors and operations/maintenance technicians on subsea related issues
o Providing technical leadership on all subsea-related issues.
o Act as company representative at such events as load tests, trial fit-ups etc.
o Perform administrative functions; such as writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis.
o Ensure that all pipelines are inspected and maintained according to clients Specifications and the Mineral Oil Safety Regulations (MOSR) of the Department of Petroleum Resources (DPR)and fit for purpose
o Ensure all subsea activities are perform within budget
o Ensure technical support in assuring integrity of FSO Unity and CALM Buoy
o Ensure statutory and integrity compliance of production assets as required by statutory regulations and company rules.
o Able to supervise inspection program for all platform jackets and pipelines risers to assure integrity and compliance to Local regulations and company rules
o Define scope of work, budget and planning for subsea inspection of platform jackets and pipeline risers in accordance to COMPANY Rule, Department of Petroleum Resources Regulations.
o Supervise the operation of underwater inspection of platform jackets, anchor chains, flexible risers PLEM by either Diving or ROV.
o Supervise Classification activities of FSO Unity and CALM Buoy as per BV Class Rules
In addition; participant shall be able to support the following activities with regards to subsea UFR and pipeline Pipelines Inspection activities for all JV Field Operation in Offshore and Onshore locations.

Click here to view full course details

Training Mode: Live Online Class / Class Room (options available)

Start Date

Online: 4th April 2022
(E-Learning + Live Stream Classes)

Offline: 4th April 2022

Course Fees:

Online: N 699, 999 Naira Only
Offline: N 899,999 Naira Only

Pipelines and Flow lines:
o Supervise inspection program for all platform jackets and pipelines risers to assure integrity and compliance to Local regulations and COMPANY rules
o Define scope of work, budget and planning for subsea inspection of platform jackets and pipeline risers in accordance to COMPANY Rule & Department of Petroleum Resources Regulations.
o Supervise the operation of underwater inspection of platform jackets, anchor chains, flexible risers PLEM by either Diving or ROV.
Subsea Structures:
o Supervise inspection program for all platform jackets and pipelines risers to assure integrity and compliance to Local regulations and COMPANY rules
o Define scope of work, budget and planning for subsea inspection of platform jackets and pipeline risers in accordance to COMPANY Rule & Department of Petroleum Resources Regulations.
o Supervise the operation of underwater inspection of platform jackets, anchor chains, flexible risers PLEM by either Diving or ROV.
Floating Units:
Supervise Classification activities of FSO Unity and CALM Buoy as per BV Class Rules which involves:
o Elaborate planning and scheduling of survey of FSO Unity Hull and Tanks
o Issuing scope of work, budget and planning for underwater activities by diving and ROV for class surveys
o Liaising with HQ on repair recommendations of Floating units as per Class Rules.
o Planning and maintaining floating export hoses and export risers in accordance with international standards
UFR Engineering:
o Coordinating & supervising the specifications of cable and ensure the manufacturing is done in accordance with such specifications,
o Applying applicable international codes and standards for cable.
o Supporting required tests to be performed on cable right from manufacturing to commissioning stage with acceptance criteria,
o Supervising the vendor reps when they perform such tests and ensure everything is done correctly.
o Supporting in provide inputs on troubleshooting in case of any fault finding.
o Providing installation support along with pulling of the cable from J tube to J tube on platforms.
o Applying knowledge of various Installation aids required for installation of such cable.
o Interfacing with MWS during load-out and sea-fastening of cable reels.
o Coordinating & supervising installation analysis and ensure installation is done in accordance to it.
Renewable Energy Engineers:
Renewable energy engineers work on the production of energy from renewable or sustainable sources, including wind, solar and hydro or marine power. They research and develop new machinery and equipment, production processes and ways to minimise impact on the environment.

The Work
You could be:
o working out the technical and economic aspects of new renewable energy sites, including wind farms, solar installations and hydro or marine power
o carrying out site and ground condition inspections for new and existing sites
o using computer modelling software to produce detailed designs and energy production estimates
o ensuring that the installation and running of renewable energy sites meets environmental laws
o preparing project plans, schedules of work and cost estimates
o managing the integration of the renewable energy produced into existing systems
o testing equipment and processes in a lab to make sure they are suitable for wide scale use
o writing and presenting technical reports
o liaising with energy providers, contractors and other engineering and science professionals.
Job Opportunity
Very Good opportunities exist in Europe, Nigeria, UAE, India and abroad with attractive remunerative packages as the demand is increasing for well qualified personnel in various positions in the following sectors:
o Renewable Energy & Offshore companies including Offshore Structure Design and Drawing offices
o Pipeline Company, Vendors & installation Contracto
o Subsea UFR Vendors & installation Contractor
o Government and Private Oil and Natural Gas Corporations
Click here to view full course details

For Registration:

All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly.

Offshore Engineering & Technology for Technicians & Graduates (OETTG) Level 1 & Level 2
Course Purpose

To develop the highly specialized skills and knowledge required for Offshore Engineering & Technology at Level 1 to Level 2.

Offshore Engineering & Technology for Technicians & Graduates (OETTG) Level 1 & Level 2 is structured for graduate engineers or technicians working as subsea engineers, offshore engineers, integrity engineers, project engineers etc.

Click here to view online

Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Fixed Platforms, Semi-Submersible Platforms, Jack-up Platforms, Compliant Towers, Drill ship, Floating Production Systems, SPAR Platforms, Tension Leg Platforms, Maintenance and Supply, Crew, Facilities in Well Platforms, Pneumatic Control Panels, Fire and gas leakage protection system, Surface Facility Protection, Well control & Protection, SMART Wellhead Platforms, Well Monitoring and Control RTU / SCADA, Major Benefits of SCADA, Separation (Oil, Gas and Produced water) & Oil dispatch, Gas Compression & dehydration, Produced Water Conditioning, Sea water processing & injection system, Fire Detection & Suppression System, Utilities Offshore, Intelligent wells, Digital Oil Field via SCADA, Multiphase Pumping, Subsea Processing and more.

Offshore Engineering & Technology for Technicians & Graduates (OETTG) Level 1 & Level 2 is structured to bridge the needed knowledge gap at beginners to intermediate level.

Course Outline

Module 1: Platforms
o Introduction
o Fixed Platforms
o Semi-Submersible Platforms
o Jack-up Platforms
o Compliant Towers
o Drill ship
o Floating Production Systems
o SPAR Platforms
o Tension Leg Platforms
o Maintenance and Supply
o Crew
o Personnel’s
o Risk
Module 2: Wellhead Platform – Unmanned
o Facilities in Well Platforms
o Pneumatic Control Panels
o Fire and gas leakage protection system
o Surface Facility Protection
o Well control & Protection
o SMART Wellhead Platforms
Module 3: Wells
o Well Monitoring and Control RTU / SCADA
o Major Benefits of SCADA
Module 4: Processing in Offshore Process Platforms
o Separation (Oil, Gas and Produced water) & Oil dispatch
o Gas Compression & dehydration
o Produced Water Conditioning
o Sea water processing & injection system
o Fire Detection & Suppression System
o Utilities Offshore
Module 5: New Technologies
o Intelligent wells
o Digital Oil Field via SCADA
o Multiphase Pumping
o Subsea Processing
Click here to view online

Assessment
Participant underpinning knowledge of Offshore Engineering & Technology will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Offshore Engineering & Technology. They will also be able to function with minimum supervision as a Offshore Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate
o Issued directly by Chess Subsea Engineering Europe.
o Participant shall be presented for Offshore Petroleum Training Organization (OPITO) Certification.
Course Fees:
Online: N 49,990 Naira Only
Offline: N199,999 Naira Only

Start Date

Online: 4th April 2022 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 4th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria.

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa)

Deepwater Subsea Field Development & Systems Integration Engineering (DSSEIE) Level 2
Purpose
To develop the highly specialized skills and knowledge required for Deepwater Subsea Field Development & Systems Integration Engineering (DSSEIE) at Level 2.

Deepwater Subsea Field Development & Systems Integration Engineering (DSSEIE) Level 2 is designed for Offshore Engineers, Subsea Engineers, Offshore Project Engineers, Offshore Installation Manager, Structural Design Engineers & Business Development Managers.

Description
This course covers Deepwater or Shallow-Water Development, Wet Tree, Dry Tree Systems & Systems Selection, Subsea Tie-Back Development, Field Design, Selection and Challenges, Standalone Development, Comparison between the Stand-Alone and Tie-Back Developments, Classification of Stand-Alone Facilities, Subsea Pressure Boosting & Processing, Template, Clustered Well System, and Daisy Chain, Subsea Field Development Assessment and more.

This course is designed to provide detailed knowledge of Deepwater Subsea Field Development & Systems Integration Engineering and will assist those who are switching or enhancing their career in deep and ultra deepwaters subsea engineering.

Click here to know more

Course Outline

Section 1: Architecture of Subsea Field Development
o Overview of Subsea Field Development
o Deepwater or Shallow-Water Development
o Wet Tree, Dry Tree Systems & Systems Selection
Section 2: Subsea Tie-Back Development Design Selection & Challenges
o Subsea Tie-Back Development, Field Design, Selection and Challenges
o Stand-Alone Development
o Comparison between the Stand-Alone and Tie-Back Developments
o Classification of Stand-Alone Facilities
Section 3: Subsea Field Development Pressure Boosting & Processing Selection
o Subsea Pressure Boosting & Processing
o Template, Clustered, and Daisy Chain Well System Configuration
Section 4: Assessment of Subsea Field Development
o Subsea Field Development Assessment
Assessment
Participant underpinning knowledge of Deepwater subsea field development & systems integration engineering engineering will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Deepwater Subsea Field Development & Systems Integration Engineering along with its architecture. They will also be able to function with minimum supervision as a Subsea Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 149,999 Naira Only
Offline: N 310,000 Naira Only

Start Date

Online: 8th April 2022
(E-Learning + Live Stream Classes)

Offline: 8th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:

All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Deepwater Offshore & Subsea Operations Engineering Project Design & Planning (DOSOEPDP) Level 2
Purpose
To develop the highly specialized skills and knowledge required for Deepwater Offshore & Subsea Operations Engineering Project Design & Planning at Level 1 & Level 2.

Deepwater Offshore & Subsea Operations Engineering Project Design & Planning (DOSOEPDP) Level 2 is designed for Offshore Engineers, Subsea Engineers, Offshore Project Engineers, Offshore Installation Manager, Structural Design Engineers & Business Development Managers.

Description
This course covers EPC Concept Selection & FEED, Categories of Pipeline FEED / Detailed Engineering Design I.e. Flow Assurance, Pipeline Type, Linepipe Material & Coatings, Wall Thickness Selection, Pipeline Stability, Pipeline Expansion, Pipe Thermal Buckling, Pipeline Protection etc., Pipeline FEED / Detailed Design Engineering Design Code, Fabrication & Installation, Pre-Commissioning Activities, Tie Ins, Protection and more

This course is designed to provide detailed knowledge of Deepwater Offshore & Subsea Operations Engineering Project Design & Planning and will assist those who are switching or enhancing their career in deep and ultra deepwaters subsea engineering.

Click here to know more

Course Outline

Section 1: Overview of Subsea Engineering
o History of Subsea Engineering
o Subsea Production Systems
o Flow Assurance and System Engineering
o Subsea Structures and Equipment
o Subsea Umbilicals, Risers, and Pipelines
Section 2: Project Interface Management
o Project Roles and Responsibilities
o Interface Matrix, Scheduling & Management Plan
o Interface Management Procedure
o Interface Register, Internal & External Interface Management
Section 3: Offshore & Subsea Operations Engineering Project Design & Planning
o Offshore EPIC Project Interface Architecture
o Case Study of Subsea Pipeline Operations Engineering Project Design & Planning
o EPC Concept Selection & FEED
o Detailed Engineering Design Detailed Categories
o Pipeline FEED / Detailed Design Engineering Design Code
o Fabrication & Installation
o Pre-Commissioning & Commissioning Activities
o Tie Ins & Protection
Assessment
Participant underpinning knowledge of deepwater offshore & subsea operations engineering project design & planning will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Deepwater Offshore & Subsea Operations Engineering Project Design & Planning along with core interface management. They will also be able to function with minimum supervision as a Subsea Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate
CPD UK approved certificate issued directly Chess Subsea Engineering Europe.

Course Fees:
Online: N 149,999 Naira Only
Offline: N 310,000 Naira Only

Start Date

Online: 11th April 2022
(E-Learning + Live Stream Classes)

Offline: 11th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:

All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly

Subsea Engineering for Electrical Engineers (SESS) Level 1 to Level 3
Purpose
To develop the highly specialized skills and knowledge required for Subsea Engineering for Electrical Engineers at Level 1 to Level 3.

Subsea Engineering for Electrical Engineers (SESS) Level 1 to Level 3 is designed for Subsea Electrical Engineer, Offshore Engineers, Subsea Engineers, Offshore Project Engineers & Offshore Installation Manager.

Description
This course covers Subsea Production Systems, Multiplexed Electro-Hydraulic Control System, Subsea Control Module (SCM), Electric Submersible Pump (ESP), Subsea Electric Connectors, Electric Flying Leads (EFL), Construction & Installation, Subsea Distribution Unit (SDU), Subsea Power Supply, Subsea Power Grid, Electric Power System, Design Codes, Standards, Specifications & Load Calculations, Master Control Station (MCS), Topside Umbilical Termination Assembly (TUTA), Electric Power Unit (EPU), Subsea Power and Communication Unit (SPCU), Topside & Subsea Uninterruptible Power Supply (UPS), All Electric Subsea Control System and more.

This course is designed to provide detailed knowledge of Subsea Engineering for Electrical Engineers and will assist those who are switching or enhancing there career in deep and ultra deepwaters subsea engineering.

Click here to know more

Course Outlines

Section 1: Subsea Production Systems & Multiplex Electro Hydraulic Controls
o Subsea Production Systems
o Multiplex Electro Hydraulic Control System
o Subsea Control Modules (SCM)
Section 2: Subsea Electrical Submersible Pump & Flyling Leads (EFL)
o Electric Submersible Pump (ESP)
o Subsea Electrical Connectors
o Subsea Flying Leads (EFL), Construction & Installation
Section 3: Subsea Electrical Power Distribution, Distribution Unit (SDU) & Power Supply
o Subsea Electrical Power Distribution
o Subsea Distribution Unit (SDU)
o Subsea Power Supply
Section 4: Subsea Power Grid & Power System
o Subsea Power Grid
o Electrical Power System, Design Codes, Standards and Specifications
o Electrical Load Calculation
Section 5: Master Control Station (MCS) & Topside Umbilical Termination Assembly (TUTA)
o Master Control Station (MCS)
o Topside Umbilical Termination Assembly (TUTA)
Section 6: Electrical Power & Communication Unit (EPCU)
o Electrical Power Unit (EPU)
o Subsea Power & Communication Unit (SPCU)
Section 7: Uninterruptible Power Supply (UPS)
o Topside UPS
o Subsea UPS
Section 8: Electric Subsea Controls
o All Electric Subsea Control System
o Technical Workshop
o Subsea Tree P&ID Architecture
o Subsea Manifold & Flowline P&ID Architecture
o Subsea ESP systems P&ID Architecture
o Subsea ESP Pump Performance Efficiency
o Electrical & Hydraulic Distribution in Subsea Production Systems (SPS)
o Power Supply from Onshore to Subsea Architecture
o Subsea Power Grid Architecture
o Load Schedule for Electro-Hydraulic Production System Configuration
o Load Schedule for All-Electric Production System Configuration
o EPU Electrical Schematic
o Power Supply from UPS Configuration
Assessment
Participant underpinning knowledge of Subsea Engineering for Electrical Engineers will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Subsea Engineering for Electrical Engineers. They will also be able to function with minimum supervision as Subsea Control Systems Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 189,999 Naira Only
Offline: N 310,000 Naira Only

Start Date

Online: 14th April 2022
(E-Learning + Live Stream Classes)

Offline: 14th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:

All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Oil & Gas Production Engineering for Field Technicians & Engineers (OOPF) Level 1 & Level 2
Course Purpose
To develop the highly specialized skills and knowledge required for Oil & Gas Production Engineering at Level 1 to Level 2.

Oil & Gas Production Engineering Master Class for Field Technicians & Engineers (OOWC) Level 1 & Level 2 is designed for Geologists, Production Engineers, Petroleum Engineers, Well Site Engineer, Offshore Engineers, Technicians & Subsea Engineers.

Click here to view online

Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Oil & Gas Production, Flowing Wells, Artificial Lift, Oil Treating, Storage and Sale Oil, Salt Water Disposal and more.

This course is designed to provide detailed knowledge of Oil & Gas Production Engineering for Field Technicians & Engineers and will assist those who are switching or enhancing there career in Oil & Gas Production Engineering.

Course Outlines
o What is Oil Production
o Valves on a Surface Xmas Tree
o Primary Reservoir Pressure Drives
o What are Flowing Wells
o What is Artificial lift
o Methods of Artificial lift
o Oil Treatment & Types
o Separators Types & Major Components
o Free Water Knockout (FWKO) & Heater Treater
o Oil Storage & Sale for Onshore & Offshore
o Salt Water Disposal
o Gas Sweetening & Processes
Click here to view online

Assessment
Participant underpinning knowledge of Oil & Gas Production Engineering will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Oil & Gas Production Engineering. They will also be able to function with minimum supervision as Wellsite Engineer, Production Engineer or Technician for IOCs.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 49,990 Naira Only
Offline: N199,999Naira Only

Start Date

Online: 18th April 2022 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 18th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:

All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa)
Drilling Operations & Well Planning Engineering Master Class for Field Technicians & Engineers (OODE) Level 1 & Level 2
Course Purpose

To develop the highly specialized skills and knowledge required for Drilling Operations & Well Planning Engineering at Level 1 to Level 3.

Drilling Operations & Well Planning Engineering Master Class for Field Technicians & Engineers (OODE) Level 1 & Level 2 is designed for Graduate Transition Engineers, Subsea Engineers, Offshore Engineers, Petroleum Engineer, Well Engineers, Field Technicians and Project Engineers.

Description
This course covers Well Drilling Operations, Drilling Teams, Function of Drilling Engineer, Types of Oil Rigs i.e. Land Rigs & Marine Rigs e.g. Floating Rigs & Bottom Supported Rigs etc Rotary Drilling, Major Component Categorization & Components, Drilling Problems i.e. Stuck Pipe, Differential / Wall Sticking, Mechanical Sticking, Key Seating, Fishing, Loss Circulation, Borehole Instabilities, Mobile Formation etc., Well Control, Drilling Procedures, Function of Casing, Types of Casing, Casing Accessories, Casing Cementing, Subsea Drilling Risers System Configuration & Components i.e. Lower Workover Riser Package (LWRP) Emergency Disconnect Package (EDP), Stress Joints, Tension Joints, Surface Tree Adapter, Surface Tree, Diverters & Motion Compensating Equipments, Choke & Kill Lines & Drill String and more.

This course is designed to provide detailed knowledge of Drilling Operations & Well Planning Engineering and will assist those who are switching or enhancing their career in deep and ultra-deepwater drilling engineering.

Course Outline

Section 1: Drilling Operations & Well Planning Engineering
o Well Drilling Operations
o Drilling Teams
o Function of Drilling Engineer
o Types of Oil Rigs
o Rotary Drilling
o Major Component Categorization
o Well Control
o Drilling Procedures
o Function of Casing
o Types of Casing & Accessories
o Casing Cementing
o Drilling Problems
Section 2: Practical Drilling Rig Component Tour
o Hoisting Systems
o Rotating Systems
o Drilling Rig Handling Equipment
o Mud Circulation System
o Power Generation System
o Blowout Prevention System
Section 3: Step by Step Practical Well Drilling Operations
o The Drilling Site Preparation
o Leveling & Site Preparation
o Cellar Digging
o Mud Pit Preparing
o Conductor Pipe Hammering
o Rig Move
o Rig Up
o Conduction Section Drilling
o Rig Acceptance
o Pipe Racks
o Making Stands
o Rack Back Stands On
o Bottom Hole Assembly
o Preparing Spud Mud
o Spud In
o Continue Drilling
o Mud circulation for hole cleaning
o POOH
o Hole Cleaning
o Conductor Casing Running
o Casing Cementing
o Cutting the 30 inch CP at the specified depth below rotary table
o Diverter System
o Continue Drilling
o Mud circulation for Hole Cleaning
o Running 13 3/8 inch Casing & Cementing
o Sonic Path in Casing Hole
o Cement to Casing Bond
o Wellhead and Casing Head Installation
o N/U BOP on 13 3/8 Surface Casing
o Make Up 12 1/4 bits & BHA and RIH to Drill the Shoe and Cement
o Casing Setting Types
o Continue Drilling and Running Electric Logs
o Logging While Drilling
o RIH with 7inch Liner on Drill Pipe
o Component of Liner Systems
o Casing Strings
o 3D Animation of Entire Running Sequence
Section 4: Deepwater Drilling Operations & Control
o Subsea Drilling Risers System Configuration & Components
o BOP Adapter Joint
o Lower Workover Riser Package (LWRP)
o Emergency Disconnect Package ( EDP)
o Stress Joints
o Tension Joints
o Surface Tree Adapter
o Surface Tree
o Diverters
o Motion Compensating Equipment’s
o Choke & Kill Lines
o Drill String
Click here to know more online.

Assessment
Participant underpinning knowledge of Drilling Operations & Well Planning Engineering will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Drilling Operations & Well Planning Engineering for deepwater operations. They will also be able to function with minimum supervision as Subsea Drilling Engineer for IOCs, subsea drilling contractor or drilling procurement vendors.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 59,999 Naira Only
Offline: N 249,999 Naira Only

Start Date

Online: 21st April 2022
(E-Learning + Live Stream Classes)

Offline: 21st April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.

Oil & Gas Well Completion Engineering Master Class for Field Technicians & Engineers (OOWC) Level 1 & Level 2
Purpose

To develop the highly specialized skills and knowledge required for Oil & Gas Well Completion Engineering at Level 1 to Level 2.

Oil & Gas Well Completion Engineering Master Class for Field Technicians & Engineers (OOWC) Level 1 & Level 2 is designed for Geologists, Petroleum Engineers, Well Site Engineer, Offshore Engineers, Cementing Engineers, Technicians & Subsea Engineers.

Description

This course covers Well Completion, Setting Production Casing, Installing the Tubing, Installing the Christmas Tree, Types of Well Completion, Factors Influencing Well Completion Selection, Type of Flow, Completion and Workover Fluids, Perforating, Well Stimulation and more.

This course is designed to provide detailed knowledge of Oil & Gas Well Completion Engineering for Field Technicians & Engineers and will assist those who are switching or enhancing their career in Oil & Gas Well Completion Engineering.

Course Outline
o What is Well Completion
o Setting Production Casing
o Installing the Tubing
o Installing the Christmas Tree
o Types of Well Completion
o Factors Influencing Well Completion
o Selection Type of Flow
o Completion and Workover Fluids
o Perforating
o Well Stimulation
Click here to know more online.

Assessment
Participant underpinning knowledge of Oil & Gas Well Completion Engineering will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Oil & Gas Well Completion Engineering. They will also be able to function with minimum supervision as Wellsite Engineer, Cementing Engineer or Geologist for IOCs.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 49,999 Naira Only
Offline: N185,000 Naira Only

Start Date

Online: 23rd April 2022
(E-Learning + Live Stream Classes)

Offline: 23rd April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.
Natural Gas Engineering Production Processes (NGEPP) Level 1 & Level 2
Purpose
To develop the highly specialized skills and knowledge in the areas of natural gas engineering production Processes.
This online course is structured for project engineers, project managers, graduate engineer, plant engineer, gas engineer, production engineer, process engineer, reliability engineers, integrity engineers currently working for or switching carrier to natural gas engineering production. Natural Gas Engineering Production Processes (NGEPP) Level 1 & Level 2 is structured to bridge the needed knowledge gap at beginners to intermediate level.

Click here to view online

Training Mode: Live Online Class / Class Room (options available)

Course Outlines

Section 1.0: Overview of Natural Gas Engineering Production Processes
o LNG Production Process
o What are Sour Gasses
o Sour Gas Plant with NGL Recovery
o Natural Gas Condensate Separation
o Natural Gas Industry Sector & Operation
Section 2.0: Gas & Treatment Compression
o Heat Exchangers
o Scrubbers & Reboilers
o Compressors, Anti Surge & Performance
o Section 3.0: Natural Gas Processing
o Natural Gas Processing Architecture
o Acid Gas Removal Process
o Dehydration
o Mercury Removal
o Nitrogen Rejection
o NGL Recovery
o Fractionation Train
o Gas Sweetening Process
Section 4.0: Liquefied Natural Gas (LNG)
o What is LNG
o LNG Lifecycle
o Basic Facts about LNG
o LNG Liquefaction
o Storage, Transport and Regasification
Section 5.0: Compressed Natural Gas
o Introduction to CNG
o Advantages
o CNG Technology
o Transportation of the Gas
o CNG Application
o Comparison of CNG and LNG
o Advantages of CNG over LNG
Section 6.0: Gas to Liquid (GTL) Technology
o What is GTL?
o F-T Synthesis
o GTL Technology Assessment &
o GTL Costs
Click here to view online

Assessment
Participant underpinning knowledge of natural gas engineering production Processes will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of natural gas engineering production Processes. They will also be able to function with minimum supervision as Gas Engineers for Operating companies (usually oil companies) that hold exploration and production licenses, LNG companies, and LNG plant construction facilities.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 189,999 Naira Only
Offline: N 349,999 Naira Only

Start Date

Online: 25th April 2022 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 25th April 2022
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly
Methanol Production using Natural Gas as FEED Stock Beginners Master Class for Graduate Engineers & Technicians (MPNGFSBMC) Level 1 & Level 2
Purpose

To develop the highly specialized skills and knowledge required for Methanol Production using Natural Gas as FEED Stock at Level 1 & Level 2.

Methanol Production using Natural Gas as FEED Stock Beginners Master Class for Graduate Engineers & Technicians (MPNGFSBMC) Level 1 & Level 2 is designed for Process Engineer, Chemical Engineers, Production Engineers, Petroleum Engineers & Technicians

Click here to view online

Training Mode: Live Online Class / Class Room (options available)

Description
Methanol (CH3OH) is a liquid chemical used in thousands of everyday products, including plastics, paints, cosmetics and fuels. Liquid methanol is made from synthesis gas, a mix of hydrogen, carbon dioxide and carbon monoxide. These simple ingredients can be sourced from a wide range of feedstocks and using different technology approaches. Renewable methanol is an ultra-low carbon chemical using biomass or natural gas as feed stock.

MPNGFSBMC Level 1 & Level 2 focuses on using natural gas as FEED stock and covers Major Methanol End-uses In Fuels Applications, Desulphurization of Natural Gas, Synthesis Gas Generation, Synthesis Gas Compression, Methanol Synthesis, Methanol Distillation, Methanol Production Technologies i.e. Methanol production based on one step reforming, 2-2- Methanol production based on two step reforming, 2-3- Methanol Synthesis Loop, 2-4- Methanol Distillation and more

Course Outlines

Section 1: Introduction to Methanol Production
o Methanol Production Introduction
o Major Methanol End-uses In Fuels Applications
Section 2: Methanol Production Processes
o Desulphurization Of Natural Gas
o Synthesis Gas Generation
o Synthesis Gas Compression
o Methanol Synthesis
o Methanol Distillation
Section 3: Methanol Production Technologies
o Methanol production based on one step reforming
o 2-2- Methanol production based on two step reforming
o 2-3- Methanol Synthesis Loop
o 2-4- Methanol Distillation
Assessment
Participant underpinning knowledge of Methanol Production using Natural Gas as FEED Stock will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of Methanol Production using Natural Gas as FEED Stock. They will also be able to function with minimum supervision as Process Engineer, Production Engineer or Technician for IOC or indigenous methanol production company.

Professional Certificate
o Issued directly by Chess Subsea Engineering Europe.
Course Fees:
Online: N 189,999 Naira Only
Offline: N 349,999 Naira Only

Start Date

Online: 28th April 2022 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: 28th April 2022

Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly with proof of payment.
Wellhead Engineering for Graduate Well Engineers & Field Technicians (WHEGWEFT) Level 1
Purpose
To develop the highly specialized skills and knowledge required for wellhead engineering, associated components & installation at Level 1.

Wellhead Engineering for Graduate Well Engineers & Field Technicians (WHEGWEFT) Level 1 is designed for Geologist, Graduate Transition Engineers, Subsea Engineers, Offshore Engineers, Petroleum Engineer, Well Engineers, Field Technicians and Project Engineers.

Click here to know more

Training Mode: Live Online Class / Class Room (options available)

Description
This course covers Wellhead Assembly Configurations, Selection of Wellhead, Manufacturing, Working Pressure & Temperature, Material Class, Product Specifications Level (PSL), Casing Head, Casing Head Housing, Casing Head Spool, Casing Hanger, Tubing Head, Tubing Hanger, Test Plugs and Bowl Protectors, Seals Technology, Leveling & Cold Cutting, Welding & Weld Test, Casing Running and Hunger Set, N/U and Test BOP, Installation of Wellhead & Christmas Tree and more.

WHEGWEFT Level 1 is designed to provide detailed knowledge of Wellhead Engineering along with associated components and will assist those who are switching or enhancing there career in wellhead engineering or well operations.

Course Outlines

Section 1: Wellhead Surface Equipment
o Wellhead
o X-mas Tree
o Flowline
o Control & Protection Equipment
Section 2: Wellhead Assemblies, Selection & Classification
o Wellhead Assembly Configurations
o Selection of Wellhead
o Manufacturing, Working Pressure & Temperature
o Material Class
o Product Specifications Level (PSL)
Section 3: Wellhead Components
o Casing Head
o Casing Head Housing
o Casing Head Spool
o Casing Hanger
o Tubing Head
o Tubing Hanger
Section 4: Wellhead Assesories
o Test Plugs and Bowl Protectors
o Seals Technology
Section 5: Wellhead Installation & Maintenance
o Leveling & Cold Cutting
o Welding & Weld Test
o Casing Running and Hunger Set
o N/U and Test BOP
o Installation of Wellhead & Christmas Tree
Click here to know more

Assessment
Participant underpinning knowledge of wellhead engineering, associated components & installation will be accessed with short answer multiple choice questionnaire at the conclusion of the course.

Outcome
Participants will gain an in debt understanding of wellhead engineering, associated components & installation. They will also be able to function with minimum supervision as Wellhead Engineers, Well Engineer or Field Engineer for IOCs, drilling contractor or drilling procurement vendors.

Professional Certificate
o CPD UK approved certificate issued directly Chess Subsea Engineering Europe.
Course Fees:
Online: N 49,999 Naira Only
Offline: N145,000 Naira Only

Start Date

Online: 31st April 2021 (Indicate preferred start date on registeration booklet if not convenient)
(E-Learning + Live Stream Classes)

Offline: To be scheduled
Training Venue (Offline Option Only)

Portharcourt:
Chess Subsea Engineering Deepwater’s Training & Simulation Centre, No 5 Off Stadium Rumoula Link Road, Portharcourt, Rivers State, Nigeria

For Registration:
All course registration is online. Please contact info@chesssubseaengineering.org directly or email info@chesssubseaengineering.org or WhatsApp us on +447946739882 (International) or +2348151453146 (Africa) directly.
MEET OUR CLIENTS & PARTNERS
Globally recognized worldwide
Chess Subsea Engineering provides diverse consultancy services to the Energy, Oil & Gas and Automotive industries by bridging the gap between research and academic professionals and the Industry. Chess Subsea Engineering is a full-service consulting firm that specializes in facilitating relationships between businesses and professional consultants and academicians.

Our international operational platform combined with teams of experienced and knowledgeable Consultants enable us to respond to our clients’ needs in a wide range of specialized areas:
o Renewable Energy Systems
o Subsea and Subsurface
o Drilling and Completions
o Health Safety and Environment (HSE)
o Project Management
o Facility Management
o Waste Management
o Offshore Dredging Operations & Project Management
Our target market consists of two customers:

Consultants / Academicians / Researchers & Small / Medium to Large Size Businesses

In serving as a “business agent,” its intent is to benefit both parties through its networking services. In summary, Chess Subsea Engineering is focused on providing personalized services, exhibit genuine concern for all customers, and demonstrate ethical behaviour in furthering its success and the success of its clients. For instance, researchers and consultants, whether young, old, experienced, or inexperienced, face the task of networking to identify potential clients, which results in increased business.

Small to medium businesses are now seeking independent consultants to provide quality, professional services instead of following the traditional practice of hiring a full-time employee to provide these services. With the present technology, Chess Subsea Engineering is capable of functioning in a central location, yet serving all her clients globally.

The post Chess Subsea Engineering Limited Oil & Gas Training in Nigeria April 2022 appeared first on Jobs in Nigeria – http://jobsinnigeria.careers.